Shanks and spring bar kits
CURT 17123 Weight Distribution Shank, 2 inch, 7 inch drop, 10-1/2 inch rise: published ratings and specifications
Reversible, so one part covers a 7 inch drop or a 10-1/2 inch rise depending on which way up it goes in the receiver. That range covers almost every travel trailer and tow vehicle combination.
This page carries only what CURT publishes for this part. Where a figure is not published we leave it out rather than estimating it, because a reader comparing two pieces of towing hardware on a table cannot tell a published rating from a guess and should never have to.
What does CURT publish for the CURT 17123 Weight Distribution Shank, 2 inch, 7 inch drop, 10-1/2 inch rise?
CURT publishes 3 figures for the CURT 17123 Weight Distribution Shank, 2 inch, 7 inch drop, 10-1/2 inch rise, including a receiver size of 2.
Published standard A published, traceable figure: a standards body, a federal regulation or a manufacturer specification states it.
| Specification | Published figure |
|---|---|
| Receiver size | 2 |
| Drop | 7 in |
| Rise | 10.5 in |
Taken from the manufacturer listing. Anything the maker does not publish is absent here rather than estimated.
What the manufacturer says about it
- RECEIVER FIT, Designed for 2" x 2" hitch receiver openings with a 5/8" hitch pin hole and compatible with CURT weight distribution hitch heads.
- ADJUSTABLE HEIGHT, Can be flipped to provide up to 7" of drop or 10-1/2" of rise, with 3/4" head-mounting holes spaced 1-1/4" center-to-center for height adjustment.
- DEPENDABLE STRENGTH, Solid steel construction is rated for up to 15,000 lbs. GTW and 1,500 lbs. TW, limited to the spring-bar capacity and lowest-rated towing component.
- SHANK ONLY, Package contains one CURT 17123 weight distribution shank only. Weight distribution head, spring bars, hitch pin and other hitch components are not included.
- CORROSION-RESISTANT, Protected with a durable carbide black powder coat finish for long-lasting resistance to road salt, moisture and corrosion.
Quoted from the manufacturer's own listing and kept as a citable source rather than paraphrased into a specification we could not attribute.
How it compares on published ratings
The nearest alternatives in the same category, compared on the same figures. A blank cell is a figure that maker does not publish.
| Published rating | CURT 17123 Weight Distribution Shank, 2 inch, 7 inch drop, 10-1/2 inch rise | Husky Towing 32555 14 inch Shank with 8-3/4 inch Drop | Blue Ox BXW4042 TrackPro Spring Bar Kit, 1,300 lb tongue weight | CURT 17132 Weight Distribution Hitch Shank, 2-1/2 inch receiver, 8 inch drop |
|---|---|---|---|---|
| Price | $122.80 | $125.40 | $171.17 | $197.77 |
| Spring bar rating | not published | not published | 1,300 lb | not published |
| Receiver size | 2 | not published | not published | 2-1/2 |
| Drop | 7 in | 8.75 in | not published | 8 in |
| Rise | 10.5 in | not published | not published | not published |
| Length | not published | 14 in | not published | not published |
Every figure here is the manufacturer's own published rating. A blank is a figure the maker does not publish, and we leave it blank rather than estimating it. The rating stamped on the part you actually receive is what governs.
Before you rely on any of these numbers
A published rating is the maximum the maker will stand behind for that part in isolation. The assembled hitch is limited by its lowest rated component, so a receiver, a shank, a ball mount, a ball and a pin each carry their own figure and the smallest of them is your real limit.
And none of them raises anything on your vehicle. Your payload, GVWR, GCWR and axle ratings come off your own door jamb sticker and owner manual, and no part on this page changes a single one of them.
Frequently asked questions
What are the published ratings for the CURT 17123 Weight Distribution Shank, 2 inch, 7 inch drop, 10-1/2 inch rise?
CURT publishes receiver size of 2, drop of 7 in, rise of 10.5 in. Every figure on this page comes from the manufacturer's own listing. The rating stamped or labelled on the part you actually receive is the one that governs.
Is the CURT 17123 Weight Distribution Shank, 2 inch, 7 inch drop, 10-1/2 inch rise rating the same as what my vehicle can handle?
No. A part rating and a vehicle rating are completely separate things. This part will carry what its maker says it will carry, and your vehicle will carry what the sticker in your door jamb says. The lower of the two governs, and on most vehicles it is the vehicle. Work your payload sum before you choose hardware.
What limits an assembled hitch?
Whichever component is lowest rated. The receiver, the shank, the ball mount, the ball and the hitch pin each carry an individual rating, and the assembly is limited by the smallest of them. A class V receiver fitted with a 5,000 lb ball mount is a 5,000 lb hitch, not a 17,000 lb one, and the same logic applies to every part in the chain.
Why are some specification cells blank on the comparison?
Because that manufacturer does not publish that figure. We leave it blank rather than estimating it, inferring it from a similar model, or copying it from a retailer listing that may have invented it. On a site about load ratings, a plausible looking number in a specification table is more dangerous than an honest gap.
Where do these figures come from?
From CURT's own product listing, pulled programmatically rather than retyped, which is how the price and image on this page stay current too. We do not test towing hardware in person and we never claim to. Nothing here is a measurement we took, and everything here is a figure the maker published.
Free download
Get the complete tow rig setups emailed to you
Both ladders, conventional travel trailer and fifth wheel, at beginner, intermediate and expert budgets, every item priced and linked with a running total, plus a printable pre-trip weighing worksheet you can fill in at the scale.
One email with the setups. No sequence, no sharing your address, unsubscribe any time.
Researched, not professional advice. This page is compiled from published standards, manufacturer towing guides and product specifications, and owner-review consensus, not hands-on testing. Figures described as a rule of thumb are towing convention rather than published standards, and they are labelled that way wherever they appear. Nothing here overrides your own ratings. Work your payload sum before your tow rating, because payload is the limit that actually binds on most half ton trucks and nearly every SUV. Load a conventional trailer to 10 to 15 percent tongue weight and a fifth wheel to 15 to 25 percent pin weight, and never lighter: a tail heavy trailer is what starts sway. Weigh the rig loaded rather than trusting a brochure dry weight. A weight distribution hitch and a set of air bags both restore ride height and control, and neither one raises a single rating. Trailer brakes are required by state law above a threshold that varies by state, and a breakaway battery that has quietly gone flat is the normal condition of most trailers on the road.